The “Basic Electricity Trainer” simulator is designed for learning the basics of electrical engineering and electronics.
Trainer functionally controllable on external panel
The mounting plate provides the basis for building electrical circuits.
The system is equipped with the power supplies necessary for the experiment.
All inputs and outputs on each panel are equipped with safety connection wires, jumpers with 4 mm connectors.
Includes a detailed step-by-step guide to conducting experiments.
Technical parameters:
Mounting plate with connectors for connection
Mounted on a standard frame, used to assemble experiment circuits from modular components.
24 isolated groups of contacts in each group of 9 interlocked contacts with 4 mm connectors for connection.
4 isolated groups of contacts, each group has 18 interconnected contacts with 4 mm connectors for connection.
Dimensions: 297 × 300 mm
Power supply unit – 1 pc.
Power supply voltage: 220 VAC
Outputs: +15 Vdc, -15 Vdc, +5 Vdc, ground.
Current: 3A
Size: width 114 mm, height 297 mm
Output connections: 4 mm connector
Adjustable power supply – 1 pc.
Power supply voltage: 220 VAC
Output for DC: 0 – 20 V
AC output: stepwise 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20 V
Current: 1A
Size: width 114 mm, height 297 mm
Output connections: 4 mm connector
Three-phase transformer – 1 pc.
Input voltage maximum: 0-220 VAC L-N
Output voltage: 0-9 VAC
Current: 300 mA
Size: width 114 mm, height 297 mm
Output connections: 4 mm connector
Multimeter – 2 pcs.
works as a voltage and current meter in one device
Sliding switch for measuring modes (ammeter/voltmeter)
Ammeter, range: 100 µA – 100 mA – 1 A and 5 A (constant current)
Voltmeter, range: 100 mV – 1 V – 10 V and 50 V (DC)
Components of electrical circuits are made in the form of plastic boxes with connectors 4 mm, which allows them to be mounted on the mounting plate with connectors for connection
Container Box I, consists of:
SPST switch – 1 pc.
Resistor 3.3Ohm/2W- 1 pc.
Resistor 10 Ohm / 0,5 W – 2 pcs.
Resistor 47 Ohm/0,5W- 1 pc.
Resistor 68 Ohm / 0,5 W – 1 pc.
Resistor 100 Ohm / 0,5 W – 2 pcs.
Resistor 150 Ohm / 0,5 W – 1 pc.
Resistor 220 Ohm / 0,5 W – 1 pc.
Resistor 270 Ohm / 0,5 W – 1 pc.
Resistor 330 Ohm / 0,5 W – 1 pc.
Resistor 470 Ohm / 0,5 W – 1 pc.
Resistor 560 Ohm / 0,5 W – 1 pc.
Resistor 220 Ohm / 3 W – 1 pc.
Resistor 1 kOhm / 0,5 W – 2 pcs.
Resistor 1,5 kOhm / 0,5 W – 1 pc.
Resistor 4,7 kOhm / 0,5 W – 1 pc.
Resistor 100 kOhm / 0,5 W – 1 pc.
LDR photoresistor – 1 pc.
100nF non-polar capacitor – 1 pc.
Non-polar 470 nF capacitor – 1 pc.
Polar capacitor, 1 µF / 35 V, tantalum – 1 pc.
Polar capacitor, 1 µF / 35 V – 1 pc.
Polar capacitor, 2.2 μF / 35 V – 1 pc.
Polar capacitor, 10 µF / 35 V – 1 pc.
Polar capacitor, 100 µF / 35 V – 3 pcs.
Diode 1N60 – 1 pc.
Diode 1N4002 – 4 pcs.
Stabilitron, 5 V, 0.25 W – 1 pc.
Neon lamp – 1 pc.
Bulb holder for E10 lamp – 3 pcs.
Lamp 3B – 2 pcs.
Lamp 6V – 1 pc.
SPDT switch – 1 pc.
Potentiometer 1 kOhm – 1 pc.
Container Box II, consists of:
Polar capacitor 2200 μF / 35 V – 1 pc.
Battery holder 1.5 V – 1 pc.
9V battery holder – 1 pc.
Coil 500 turns – 1 pc.
Coil 1000 turns – 1 pc.
U and I transformer core – 1 pc.
Bimetallic plate – 1 pc.
PTC thermistor – 1 pc.
NTC thermistor – 1 pc.
Rod magnet – 1 pc.
Set of wires and jumpers:
Connecting wire 30 cm, yellow – 10 pcs.
Connecting wire 50 cm, blue – 5 pcs.
Connecting wire 50 cm, black – 5 pcs.
Connecting wire 50 cm, red – 5 pcs.
Connecting jumper – 40 pcs.