The system is built in a modular fashion, which allows you to learn basic electronics in a modular fashion.
Large blocks are made in the form of panels. All inputs and outputs on each panel are equipped with 4-mm jacks for connection.
Connection leads, jumper links and other connecting devices are supplied in a quantity sufficient for all experiments.
Technical parameters:
Mounting plate with connectors for connection
Mounted on a standard frame, used to assemble experiment circuits from modular components.
24 isolated groups of contacts in each group of 9 interlocked contacts with 4 mm connectors for connection.
4 isolated groups of contacts, each group has 18 interconnected contacts with 4 mm connectors for connection.
Dimensions: 297 × 300 mm
Power Source
Output voltage: 5VDC/1A; 15V/2A; -15V/2A
Input voltage: 220 V AC, 1 phase, 50 Hz
Output connections: 4 mm connector
Size: 114 × 297 mm
Voltage/current source
Voltage source: AC DC 0 to 12 V / 250 mA
Current source: 0 to 500 mA
Input voltage: 220 V, 1 phase 50 Hz
Output connections: 4 mm connector
Size: 114 × 297 mm
Multimeter
works as a voltage and current meter in one device
Ammeter, range: 100 µA – 100 mA – 1 A and 5 A (constant current)
Voltmeter, range: 100 mV – 1 V – 10 V and 50 V (DC)
Aluminum frame construction for mounting devices
size 600 mm
The components in the containers are made in the form of plastic boxes with 4 mm connectors, which allows them to be mounted on the mounting plate with connectors for connection
Container Box I, consists of the following components:
Resistor 1 Ohm/0,5W -1 piece.
Resistor 3,3 Ohm/2W -1 piece.
Resistor 10 Ohm/0,5W – 2 pcs.
Resistor 22 Ohm /0,5W -1 piece.
Resistor 47 Ohm /0,5W -1 piece.
Resistor 56 Ohm /0,5W – 1 pc.
Resistor 100 Ohm /0,5W -2 pcs.
Resistor 150 Ohm /0,5W -1 piece.
Resistor 220 Ohm /5W – 1 pc.
Resistor 270 Ohm /0,5W -1 piece.
Resistor 330 Ohm /0,5W -1 piece.
Resistor 390 Ohm /0,5W-1 piece.
Resistor 470 Ohm /0,5W -1 piece.
Resistor 560 Ohm /0,5W -1 piece.
Resistor 1kOhm /0,5W -4 pcs.
Resistor 1,5 kOhm /0,5W -2 pcs.
Resistor 2,2kOhm/0,5W -1 piece.
Resistor 3,3kOhm/0,5W -1 piece.
Resistor 4,7 kOhm/0,5W -2 pcs.
Resistor 10kOhm/0,5W -2 pcs.
Resistor 12kOhm/0,5W -1 piece.
Resistor 47kOhm/0,5W -1 piece.
Resistor 82kOhm/0,5W -1 piece.
Resistor 100kOhm/0,5W -2 pcs.
Resistor 470kOhm/0,5W -1 piece.
Resistor 1MOhm/0.5W 1 pc.
SPST switch -2 pcs.
Lamp 3B 2 pcs.
Lamp 6V 2 pcs.
Lamp 12 V -1 pc.
Neon lamp -1 pc.
Red LED -1 pc.
Green LED – 1 pc.
Potentiometer 1 kOhm -2 pcs.
Potentiometer 100 kOhm -1 pc.
Container Box II, consists of the following components:
Photoresistor LDR -1pc
Capacitor 100nF -1 pc.
Capacitor 470 nF -1 pc.
1μF/35V tantalum capacitor -1pc
Capacitor 1µF/16V -1 pc.
10µF/35V capacitor -5 pcs.
Capacitor 100µF/35V -2 pcs.
Capacitor 2200μF/35V -1 piece.
Diode 1N4002 -4 pcs.
Diode 1N60 -1 pc.
Stabilitron 5V -1 pc.
DB3 diistor – 1 pc.
Thyristor C106 -1 pc.
Triac SC141D – 1 pc.
Transistor VS 547 -3 pcs.
Transistor VS 556 -1 pc.
Field-effect transistor SK-125 -1 pc.
Container Box III, consists of the following components:
I-core -1 pc.
U-shaped core -1 piece.
Coil 500 turns -1 pc.
Coil 1000 turns -1 pc.
Transistor UJT 2N246 -1 pc.
Single channel LM 741 amplifier – 1 pc.
SPDT switch – 1 pc.
DPDT switch -1 piece.
Battery holder 1.5V -2 pcs.
Battery holder 9V 1pc.
Container Box IV, consists of the following components:
Rod magnet – 1 pc.
NTC thermistor + box + connecting wire -1 set
PTC thermistor + connecting wire -1 set
Connecting jumper – 40 pcs.
Connecting wire 30 cm, yellow -30 pcs.
Connecting wire 50 cm, blue -20 pcs.