The electropneumatics training simulator system is designed for the study of pneumatic and electropneumatic technology.
All pneumatic and electro-pneumatic components are securely attached to the panel, which protects against loss or misplacement of elements and reduces setup time for each class.
Complete with three interchangeable modules (limiters, sliding door, feeder-stamp sorter) allow the user to run examples of real applications using pneumatic and electro-pneumatic technology.
Inductive non-contact sensor used to sort parts into metallic and non-metallic basis.
All electrical inputs and outputs are low-level DC and have rugged 4-mm connectors for easy connection.
The composition of the set:
Air filter regulator
– Set pressure range: 0.05 to 0.7 MPa
– Flow volume (cm3): 2,5
Pressure gauge
– Measuring range: 0 to 1 MPa
Push-button operated manual valve
– Operating pressure: -100 kPa to 1 MPa
Selector-controlled manual valve
– Operating pressure: -100 kPa to 1 MPa
Shuttle valve
– Input ports: 2
– Output port: 1
– Working pressure: 0.05 to 1MPa
Double-acting valve
– Input ports: 2
– Output port: 1
– Working pressure: 0.05 to 1MPa
Single valve with pneumatic actuator
– Type of actuation: 2-position single
– Operating pressure range: 0.15 to 0.7 MPa
– Control pressure range: 0.2 to 0.6 MPa
Double pneumatic valve
– Type of triggering: 2-position double
– Operating pressure: 0.1 to 0.7 MPa
– Pilot pressure range: 0.1 to 0.7 MPa
Single-acting cylinder with spring return 50 mm
– Built-in magnet
– Stroke: 50 mm
– Diameter: 12 mm
– Operating pressure range: 0.08 to 1MPa
– Reed switch: 2
Single-acting cylinder with spring return 100 mm
– Built-in magnet
– Stroke: 100 mm
– Diameter: 16 mm
– Operating pressure range: 0.05 to 1 MPa
– Reed switch: 2
Double-acting cylinder 80 mm
– Built-in magnet
– Stroke: 80 mm
– Diameter: 12 mm
– Operating pressure range: 0.08 to 1MPa
– Reed switch: 2
Speed regulator
– Operating pressure range: 0.1 to 1 MPa
Single solenoid valve
– Type of actuation: 2-position single
– Operating pressure range of the internal pilot: 0.15 to 0.7 MPa
– Rated coil voltage: 24 VDC
– Indicator: LED
Double solenoid valve
– Type of triggering: 2-position double
– Operating pressure range of the internal pilot: 0.1 to 0.7 MPa
– Rated coil voltage: 24 VDC
– Indicator: LED
Air distributor
– Selector-controlled manual valve
– Input port: 1
– Output port: 4
End of stroke module
– Manual valve with roller lever
Mechanical control: roller lever
Number of ports : 3
Operating pressure: 0 to 0.8 MPa
– limit switch
Ratings: 11 A at 250 VAC
Form of contact: SPDT
Drive: Roller lever
Sliding door module
– Door material: Plexiglas
Feeding-punching-sorting module:
– Double-acting cylinder 40 mm
Built-in magnet
Stroke: 40 mm
Diameter: 12 mm
Operating pressure range: 0.08 to 1 MPa
Reed switch: 2
– Vertical storage
– Vertical storage parts presence detector
Contact form: SPDT
Drive: Roller lever
– Presence sensor.
Ratings: 11 A at 250 VAC.
Form of contact: SPDT. Drive: roller lever.
– Inductive proximity sensor
Operating distance: 4 mm
Standard touch target: 12x12x1 mm (steel)
Control output: NPN N.O.
Operating voltage: 12 to 24 V
Indicator lamps
– LED lights: 3 pcs.
– Input voltage: 24 V
Lock buttons
– Lock buttons: 2 pcs.
– Rating : 1A
– Contact form: DPDT
Buttons
– Buttons: 2 pcs.
– Rating : 1A
– Contact form: DPDT
Relay
– Relay: 2 pcs.
– Input voltage: 24 VDC
– Contact form: DPDT
– Contact rating: 2 A (28 VDC), 0.5 A (125 VAC)
Power Supply
– Input voltage 220 V, 50 Hz
– Output voltage: 24 VDC
– Output current 2.1 A
Connecting wire 100 cm – 50 pcs.
Connecting wire 75cm – 20pcs.
Jumper – 10 pcs.
Pneumatic low-noise compressor – 1 pc.
Manual of experiments 1 pc.