The simulator is designed for training and practicing practical skills in automation for industries.
The system consists of modular blocks that allow students to study the PLC system according to the modular principle.
The panel-type design is convenient for conducting experiments.
All inputs and outputs on each panel have rugged 4-mm connectors for easy connection.
A model (simulation) of the plant is included in the plant implementation kit, which makes it easy to build schematics.
The Digital Output Expansion Module is included in the Digital Output Point Expansion Kit.
The analog input/output expansion module is designed to interface an analog signal with a digital signal or a digital signal with an analog signal.
Includes a complete step-by-step guide to conducting experiments
Power Supply
Output voltage: 24 VDC.
Output current: 2.1 A.
Input voltage: 220 V / 50 Hz.
Main CPU
CPU: OMRON CPI or equivalent
Program memory: 10 thousand steps
Data memory: read/write 32 thousand words
External interruption: 6
High-speed meter,
DC inputs: 36 inputs,
DC outputs: 24 outputs,
Analog control : 1 control (setting range: 0-255)
Analog input : 1 input (resolution: 1/256, input signal range 0 to 10 V). Not isolated
Instructions for PID control
Communication:
– One built-in peripheral port (USB 1.1) for auxiliary software connection only
– A maximum of 2 additional serial communication boards can be installed
– A maximum of 2 additional ethernet cards can be installed.
Maximum digital I/O capacity with additional I/O expansion units: 180 points
Maximum number of I/O expansion modules: 3 pcs.
Included add-on boards: 1 unit RS-232C port
Supports Host Link, 1:N NT Link, 1:1 NT Link, Noprotocol
PLC serial slave link, PLC serial master link, serial gateway
Conversion to CompoWay/F and Tool Bus, 1:1 Link Master and 1:1 Link Slave
Digital Extension 8ET1
Digital output: 8 outputs
Analog extension MAD01
Analog input: 2 inputs (voltage or current input, selectable)
Analog output: 1 output (voltage or current output, selectable)
HMI (Human-Machine Interface)
Display : 7″ TFT LCD
Resolution: 800 x 480
Touch panel type: 4-wire resistive type
Processor: 32-bit RISC ARM
Colors: 16M
RAM: 128 MB
USB port: USB 2.0
COM port: RS-232. RS-485 2W/4W
Power supply: 24 VDC
Relay
DC inputs: 8 inputs
Relay outputs: 8 SPDT relays 220V, 0.5A
DC input simulator
8 switches
Switching on the output voltage: 24 VDC. current
Logic LED display
16 LEDs as an indicator
input voltage: 24 VDC. current
Model traffic light
Model traffic light to simulate the intersection of a main road and a branch/secondary road.
Input voltage: 24 VDC
PLC programming software
Set of cables and connectors:
RS-232 cable – 1 pc.
USB cable – 2 pcs.
Cross connector – 40 pcs.
Connecting wire 30 cm – 40 pcs.
Connecting wire 50 cm – 80 pcs.
Additional control components can be purchased with this stand:
