Training Topics:
– Characteristics of circuits with Clipper mode.
– Characteristics of a Schmitt trigger circuit using experiments.
– Characteristics of the bistable multivibrator circuit.
– Characteristics of a monostable multivibrator circuit.
Component list:
Diagram 1: Diagram of Clipper 1 and Clipper 2
– 1 x D1, zener diode 3.3V 1W,
– 1 x D2, zener diode 3.3V 1W,
– 1 x Q1, transistor
– 1 x R1, impedance 0.25 W, 50 Ohm
– 1 x R2, resistance 0.25 W, 4.7 kOhm
– 1 x R3, resistance 0.25 W, 22 kOhm
Scheme 2: Schmitt Trigger
– 1 x C1, ceramic capacitor 101 (100pF)
– 1 x Q1, transistor
– 1 x Q2, transistor
– 1 x R1, resistance0.25 W, 10 kOhm
– 1 x R2, resistance 0.25 W, 1.5 kOhm
– 1 x R3, resistance 0.25 W, 6.8 kOhm
– 1 x R4, resistance 0.25 W, 6.8 kOhm
– 1 x R5, resistance 0.25 W, 1 kOhm
– 1 x R6, resistance 0.25 W, 200 Ohm
– 1 x R7, resistance 0.25 W, 200 Ohm
– 1 x R8, resistance 0.25 W, 6.8 kOhm
– 1 x R9, resistance 0.25 W, 6.8 kOhm
Scheme 3: Bistable multivibrator
– 1 x D1, rectifier diode
– 1 x D2, rectifier diode
– 1 x LED1, LED red
– 1 x LED2, LED green
– 1 x Q1, transistor
– 1 x Q2, transistor
– 1 x R1, resistance0.25 W, 1 kOhm
– 1 x R2, resistance 0.25 W, 100 kOhm
– 1 x R3, resistance 0.25 W, 100 kOhm
– 1 x R4, resistance 0.25 W, 1 kOhm
– 1 x SW1, switch SW
– 1 x SW2, switch SW
Scheme 4: Monostable Multivibrator
– 1 x C1, electrolytic capacitor 50V/0.1µF
– 1 x C2, multilayer capacitor 0.001µF/1n
– 1 x D1, rectifier diode
– 1 x D2, rectifier diode
– 1 x Q1, transistor
– 1 x Q2, transistor
– 1 x R1, resistance0.25 W, 1 kOhm
– 1 x R2-1, resistance 0.25 W, 80 kOhm
– 1 x R2-2, resistance 0.25 W, 40 kOhm
– 1 x R2-3 resistance 0.25 W, 20 kOhm
– 1 x R2-4 resistance 0.25 W, 10 kOhm
– 1 x R3, resistance 0.25 W, 1 kOhm
– 1 x R4, resistance 0.25 W, 1 kOhm
– 1 x R5, resistance 0.25 W, 10 kOhm
– 1 x R6, resistance 0.25 W, 10 kOhm
– 1 x S1, SW toggle switch
– 1 x S2, toggle switch SW
– 1 x S3, SW toggle switch
– 1 x S4, SW toggle switch
General Features:
– 1 PCB, 280x216x1.6T
– Connector 64 x 2 mm
