Knowledge and skills to be tested:
Ability to make indirect measurements of physical quantities:
– material densities
– archimedes forces
– coefficient of sliding friction
– spring stiffness
– period and frequency of oscillations of a mathematical pendulum
– of the momentum of the force acting on the lever
– work of the elastic force when lifting a load with a movable or a fixed block
– friction force work
– the optical power of the collecting lens
– electrical resistance of the resistor
– operation and current capacity
Ability to present experimental results in the form of tables, graphs or schematic drawings and draw conclusions based on the experimental data obtained:
– on the dependence of the elastic force arising in the spring on the degree of deformation of the spring
– on the dependence of the period of oscillation of a mathematical pendulum on the length of a string
– the dependence of the current in a conductor on the voltage at the ends of the conductor
– on the dependence of the sliding friction force on the normal pressure force
– about the properties of the image obtained with a collecting lens
Ability to conduct experimental verification of physical laws and corollaries:
– Checking the rule for the electrical voltage when resistors are connected in series
– Check the rule for the strength of the electric current when the resistors are connected in parallel
The composition of the set:
– measuring cylinder -1 pc.
– dynamometer type 1-1 pcs.
– dynamometer type 2-1 pcs.
– caliper – 1 pc.
– ruler -1 pc.
– tape measure -1 pc.
– digital stopwatch-1 pc.
– electromagnetic marker-1 pc.
– discs for the marker-5 pcs.
– paper for the marker-2 pcs.
– thermometer -2 pcs.
– Nylon thread on a spool-1 piece.
– set of cylindrical bodies-1 piece.
– number of cylindrical bodies in the set-5 pcs.
– set of cubic bodies-1 piece.
– the number of cubic bodies in the set – 4 pcs.
– aluminum bar-1 piece.
– load type 1-4 pcs.
– cargo type 2-1 pcs.
– large tripod support -2 pcs.
– tripod support small-1 piece.
– tripod rod small-2 pcs.
– tripod rod large-2 pcs.
– rod connector-1 piece.
– tripod crosspiece-1 piece.
– clip with latch-1 piece.
– position indicator (pair)-1 pc.
– spiral spring type 1 -1 pc.
– spiral spring type 2 -1 pc.
– rail guide – 2 pcs.
– rail connector-1 piece.
– guide support-2 pcs.
– step unit-1 pc.
– tube with an air bubble filled with a tinted viscous liquid -1 pc.
– light-duty cart-1 piece.
– a bar for experiments with friction – 1 pc.
– shaft-1 piece.
– hook with latch-1 piece.
– Pulley -2 pcs.
– hook for pulley – 1 pc.
– lever-1 piece.
– ball type 1-1 pcs.
– ball type 2-1 pcs.
– calorimeter-1 pc.
– thermometer without scale – 1 pc.
– syringe type 1-1 pcs.
– syringe type 2-1 pcs.
– silicone tube-1 piece.
– transparent hose-2 pcs.
– tube and hose connector – 1 pc.
– pressure gauge-1 pc.
– cuvette-1 piece.
– measuring cup -1 piece.
– mounting plate-1 piece.
– jumper for the mounting plate – 6 pcs.
– battery holder-4 pcs.
– single-pole switch-1 piece.
– resistor type 1-1 pcs.
– resistor type 2-1 pcs.
– resistor type 3-1 pcs.
– resistor type 4-1 pcs.
– resistor type 5-1 pcs.
– resistor type 6-1 pcs.
– potentiometer -1 pc.
– plug with clamp – 6 pcs.
– constantan wire on a spool-1 piece.
– nichrome wire type 1 on a spool-1 piece.
– nichrome wire type 2 on a spool-1 piece.
– connecting wire red 2 pcs.
– connecting wire black 2 pcs.
– coil of copper wire-1 piece.
– bar magnet-1 piece.
– Reiter-4 pcs.
– lens -1 pc.
– white screen -1 pc.
– lamp housing-1 piece.
– Lamp with straight filament – 2 pcs.
– diaphragm holder-1 piece.
– aperture with a hole in the form of an arrow-1 piece.
– biconvex cylindrical lens-1 piece.
– half-circular cylindrical lens-1 piece.
– optical table – 1 pc.
– diaphragm with slotted hole-1 pc.
– scales with digital indication – 1 pc.
– laboratory ammeter-1 piece.
– voltmeter training laboratory-1 piece.
– milliammeter training laboratory-1 piece.
– collection of experimental assignments -1 pcs.
