General requirements for the kit:
The Electrodynamics Laboratory Kit contains 89 components, which are housed in two lodgments in a plastic container with a lid.
The composition of the set:
Mounting plate: 1 pc.
Purpose: The mounting panel is designed for assembling electrical circuits. The components of the electrical circuit are connected via contact sockets on the panel.
Material: Plastic
Number of contact sockets in the sector: 5 pcs.
Number of sectors between which there is no connection: 24 pcs.
The contact sockets within the sector are interconnected.
The contact sockets of the different sectors are not connected to each other.
The connections between the contact sockets are marked on the panel.
Pin connector diameter: 4mm
Distance between contact sockets 19 mm
All electrical components can be mounted on the panel. That is, the distances between the pin connectors of electrical elements correspond to the distances between the connection sockets on the “mounting plate”.
Jumper: 10 pcs.
Purpose: jumper for connecting contact sockets on the panel
Crocodile clip: 2 pcs.
Body Material: Plastic
Spring holder: availability
Wire pin socket diameter: 4mm
I-core: 1 pc.
Material: iron
U-core: 1 pc.
Material: iron
Small coil: 1 pc.
Number of turns: 250 pcs.
Body: Plastic
Plug diameter: 4mm
Coil medium: 1 pc.
Number of turns: 500 pcs.
Body: Plastic
Plug diameter: 4mm
Coil large: 1 pc.
Number of turns: 1000 pcs.
Body: Plastic
Plug diameter: 4mm
Wire clip: 4 pcs.
Plug diameter: 4mm
Material: iron
Spring clamp: 2 pcs.
Plug diameter: 4mm
Material: iron
Strip magnet: 2 pcs.
Composition: AlNiCo alloy
Compass model: 1 pc.
Diameter 96 mm
Height 22 mm
Body Material: Plastic
Mini compass : 10 pcs.
Purpose: to draw up a drawing of magnetic field lines
Material: iron
Electrolysis cuvette: 1 pc.
Material: Plastic
Cross-section: rectangular
Copper electrode: 1 pc.
Purpose: for electrolysis experiments using a cuvette
Material: Copper
Type D battery holder: 4pcs
Body Material: Plastic
Plug diameter: 4mm
Red connecting wire: 2 pcs.
Plug diameter: 4mm
Length: 250 mm
Black connecting wire: 2 pcs.
Plug diameter: 4mm
Connecting wire black: 2
Length: 250 mm
Electric motor module: 1 pc.
Module Body Material: Plastic
Case size 115x90x85 mm
Plug diameter: H 4 mm
Pole holder to electric motor: 2 pcs.
Plug diameter: 4mm
Zinc electrode: 1 pc.
Material: Zinc
Steel electrode: 1 pc.
Material: Steel
Graphite electrode: 1 pc.
Material: Graphite
Transistor module: 1 pc.
Transistor type: 2SD438 or equivalent
Module Body Material: Plastic
Plug diameter: 4mm
Module with capacitor type 1: 1 pc.
Module Body Material: Plastic
Plug diameter: 4mm
Capacitance: 1μF
Maximum voltage: 35V
Module with capacitor type 2: 1 pc.
Module Body Material: Plastic
Plug diameter: 4mm
Capacitance: 470 μF
Maximum voltage: 25V
Module with capacitor type 3: 1 pc.
Module Body Material: Plastic
Plug diameter: 4mm
Capacitance: 1000uF
Maximum voltage: 16V
Module with resistor type 1: 2 pcs.
Module Body Material: Plastic
Resistor: 47 ohms
Power: 2W
Plug diameter: 4mm
Module with resistor type 2: 2 pcs.
Module Body Material: Plastic
Resistor: 10 ohms
Power: 2W
Plug diameter: 4mm
Module with resistor type 3: 2 pcs.
Module Body Material: Plastic
Resistor: 100 ohms
Power: 2W
Plug diameter: 4mm
Module with resistor type 4: 2 pcs.
Module Body Material: Plastic
Resistor: 470 ohms
Power: 2W
Plug diameter: 4mm
Module with LED: 1 pc.
LED Type: Red
Body Material: Plastic
Plug diameter: 4mm
Module with diode: 4 pcs.
Plug diameter: 4mm
Diode type: 1N4002 or equivalent
Body Material: Plastic
Module with neon lamp: 1 pc.
Voltage: 60V
Body Material: Plastic
Plug diameter: 4mm
Module with light bulb holder: 2 pcs.
Cartridge type: E10
Body Material: Plastic
Plug diameter: 4mm
Lamp: 4 pcs.
Base: E10
Voltage: 6V
Power: 3W
Type 1 wire spool: 1 pc.
Wire Material: Constantan
Cross-sectional diameter: 0.35 mm
Length: 25 m
Type 2 wire spool: 1 pc.
Wire Material: Nichrome
Cross-sectional diameter: 0.35 mm
Length: 25 m
Type 3 wire spool: 1 pc.
Purpose of the wire: for fuses, fusible
Cross-sectional diameter: 0.25 mm
Length: 25 m
Type 4 wire spool: 1 pc.
Wire Material: Copper
Cross-sectional diameter: 0.35 mm
Length: 25 m
Rod type 1: 2 pcs.
Material: PVC
Diameter 10 mm
Length 250 mm
Rod type 2: 2 pcs.
Material: plexiglass
Diameter 10 mm
Length 250 mm
Flap type 1: 1 pc.
Material: wool
Size: 200×200 mm
Flap type 2: 1 pc.
Size: 200×200 mm
Material: silk
Potentiometer module type 1: 1 pc.
Resistance: up to 10 kΩ
Body Material: Plastic
Plug diameter: 4mm
Potentiometer module type 2: 1 pc.
Resistance: up to 50 kΩ
Body Material: Plastic
Plug diameter: 4mm
Module with photoresistor: 1 pc.
Power: 0.25W
Body Material: Plastic
Plug diameter: 4mm
Single pole switch module: 1 pc.
Body Material: Plastic
Plug diameter: 4mm