Complete with a mounting plate that can be used to assemble a circuit with existing discrete modules such as resistors, capacitors, transistors, etc. The cross-connector and connecting wire are used to connect the circuit to the power supply.
The system consists of modular units that allow students to learn the basics of electronics in a modular fashion. Panel-type designs are easy for students to handle when conducting experiments.
All inputs and outputs on each panel have rugged 4-mm jacks for easy connection.
Connecting wires, cross-connector and other connecting devices are supplied in a quantity sufficient for all experiments.
The kit comes with a complete step-by-step guide to conducting experiments.
The composition of the set:
Mounting plate for the simulator panel:
– Mounted on a standard frame, used to assemble experimental circuits from modular components
– 24 jack grids with 24 conductive squares and 216 slots
– 6 panels with 36 slots
– 2 conductor tracks with 18 slots, size of each: 297 × 300 mm
Power Source:
– Output Voltage: 5 V / 1A; 15 V / 2A; -15 V / 2A DC
– Input voltage: 220 V, 1 phase 50 Hz AC
– Output connectors: 4 mm jacks
– Dimensions: 114 × 297 mm
Stepped generator:
– Input voltage: +15 Vdc, -15 Vdc
– Output connections: 4 mm sockets
– Dimensions: 114 × 297 mm
The basic measuring device:
– Ammeter, range: 100µA – 100mA – 1A and 5A DC. current
– Voltmeter, range: 100 mV – 1 V – 10 V and 50 V DC
Box I:
Resistor 100 Ohm / 0,5 W – 1 pc.
Resistor 390 Ohm / 0,5W – 1 pc.
Resistor 470 Ohm / 0,5W – 1 pc.
Resistor 1 kOhm / 0,5W – 4 pcs.
Resistor 1k5 Ohm / 0,5 W – 1 pc.
Resistor 2k2 Ohm / 0,5 W – 1 pc.
Resistor 3k3 Ohm / 0,5 W – 3 pcs.
Resistor 4k7 Ohm / 0,5W – 2 pcs.
Resistor 10 kOhm / 0,5W – 2 pcs.
Resistor 47 kOhm / 0,5W – 1 pc.
Resistor 56 kOhm / 0,5W – 2 pcs.
Resistor 82 kOhm / 0,5W – 1 pc.
Resistor 100 kOhm / 0,5W – 3 pcs.
Resistor 120 kOhm / 0,5W – 1 pc.
Resistor 330 kOhm / 0,5W – 1 pc.
Resistor 470 kOhm / 0,5W – 1 pc.
Capacitor 1 µF / 35 V – 1 pc.
Capacitor 10 µF / 35 V – 3 pcs.
Capacitor 100 µF / 35 V – 1 pc.
Capacitor 10 nF / 35 V – 3 pcs.
Capacitor 100 nF / 35 V – 1 pc.
Photoresistor – 1 pc.
Buzzer – 1 pc.
Diode 1N4002 – 2 pcs.
Single-pole switch – 2 pcs.
Single-pole two-position switch – 2 pcs.
Box II:
Transistor BC 546 – 2 pcs.
Transistor BC 547 – 2 pcs.
Transistor BD 139 – 2 pcs.
Transistor BD 140 – 1 pc.
741 operational amplifier – 2 pcs.
Phase inverter (LM741) – 1 pc.
Relay 6V – 1 pc.
Box III:
NTC Thermistor – 1 pc.
Potentiometer 1 kOhm – 1 pc.
Potentiometer 5 kOhm – 2 pcs.
Lamp 6 V – 1 pc.
U-shaped core – 1 pc.
I core – 1 pc.
LED, green – 1 pc.
LED, red – 1 pc.
Single junction transistor 2N2646 – 1 pc.
Cross connector – 40 pcs.
Connecting wire DC 30 cm, yellow – 15 pcs.
Connecting wire DC 50 cm, blue – 20 pcs.
Manual of experiments – 1 pc.