The “Power Electronics” training simulator is designed for the presentation and practice of the principle of operation of basic power electronic devices and their application in industry.
The front panel of the stand shows the standard electronic control symbols. The internal structure of the functional units is implemented solely with the help of electronics.
The system is equipped with the power supplies necessary for the experiment.
Easy and safe connection to modules.
All inputs and outputs on each panel are equipped with safe connection wires, safe cross-connectors with 4-millimeter connectors.
The kit comes with a complete step-by-step guide to conducting experiments.
Composition of components:
Power Supply:
Power supply voltage: 220 VAC.
Output voltage: +15VDC, +5VDC, GND, 12VAC, 18VAC, 220VAC.
Current: 1A.
Panel size: 114mm x 297mm
Variable power supply:
Power supply voltage: +15 Vdc, +5 Vdc, -15 Vdc, ground.
Output voltage: 0-12 VDC.
Current: 500 mA.
Panel size 114mm x 297mm
Block characteristics:
Circuit assembly for component resistor, thyristor, capacitor, dinistor, potentiometer, diode, single-pole bidirectional switch.
Conductive connections between terminals are made with 4 mm / 19 mm connectors.
Panel size 228mm x 297mm
Power circuit:
Equipped with diode rectifier circuit, thyristor circuit, two-way thyristor switch with reverse current limiting circuit.
Max. 250 VAC voltage.
Panel size 228mm x 297mm
Trigger Block Diagram:
Power supply voltage: 220 VAC.
Control voltage: 0 – 12 VDC with 0° – 180° trigger angle.
Panel size 114mm x 297mm
Charging the battery
Power supply voltage: 18 VAC.
Output voltage: 12 VDC.
Panel size 114mm x 297mm
Lead-acid battery
Power supply voltage: 12 VDC. current.
Current: 1.2 A*h.
Panel size 114mm x 297mm
Lamp base
Rated voltage 220 VAC.
Panel size 114mm x 297mm
Potentiometer
Resistor 100 kOhm, 0.25 W
Adjustable potentiometer with pointer knob.
Panel size 114mm x 297mm
Universal engine
Power supply voltage: 200 / 250 V.
Power: 85W.
Current: 0.4A.
Frequency : 50 / 60 Hz.
Panel size 114mm x 297mm
PID unit
Supply voltage : +15 Vdc, +5 Vdc, -5 Vdc, ground.
Panel size 114mm x 297mm
F/V converter
Supply voltage : +15 Vdc, +5 Vdc, -15 Vdc, ground.
Panel size 114mm x 297mm
Tachometer
Supply voltage : +15 Vdc, +5 Vdc, ground
Measuring range: 0 – 2000 rpm, instrument: moving coil, class: 2
Panel size 114mm x 297mm
Analog summing unit
Supply voltage: +15 VDC, +5 VDC, -15 VDC, ground
Max. input voltage: 15 VDC. current
Max. Output voltage: 15 VDC. current
Panel size 114mm x 297mm
Container box, consists of:
Resistor 10 Ohm, 0,5 W – 1 pc.
Resistor 100 Ohm, 0,5 W – 1 pc.
Resistor 220 Ohm, 0,5 W – 1 pc.
Resistor 680 Ohm, 0,5 W – 1 pc.
Resistor 1kOhm, 0.5W – 2 pcs.
Resistor 3.3kOhm, 0.5W – 1 pc.
Resistor 4.7 kOhm, 0.5W – 1 pc.
Resistor 10 kOhm, 0.5W – 1 pc.
10nF non-polar capacitor – 1 pc.
Non-polar 47nF capacitor – 1 pc.
100nF non-polar capacitor – 1 pc.
Diode, 1N4002 – 1 pc.
DIAK DB3 – 1 pc.
Lamp incandescent 12V+E10 socket 1 pc.
SPST switch – 1 pc.
Potentiometer 10 kOhm, 0.25 W – 1 pc.
Potentiometer 100 kOhm, 0.25 W – 1 pc.
Thyristor BT151 – 1 pc.
BT137 triac – 1 pc.
2N2646 single junction bipolar transistor – 1 pc.
Set of connecting wires and jumpers:
Connecting wire DC 30 cm, yellow -10 pcs.
DC connection wire 50 cm, yellow – 6 pcs.
Connecting wire 75 cm, black – 5 pcs.
Connecting wire 75 cm, red – 5 pcs.
Connecting wire 50 cm, red – 4 pcs.
Connecting wire 100 cm, blue – 4 pcs.
Connecting wire 30 cm, red – 7 pcs.
Safety cross-connector – 15 pcs.
Cross connector – 25 pcs.
Manual of experiments – 1 pc.
