The composition of the set:
Signal source generator:
Signal types: Sine: 512 kHz / Square: 20 kHz, 40 kHz, 80 kHz and 160 kHz
Clock generator : 5 Hz – 1 kHz
Word generator: 8 bits with toggle switch
Display Indicator: LED
Operating voltage: +15 V, +5 V and -15 VDC
Equipped with a voltage protection circuit
Amplitude modulation:
Operating voltage: +15V, +5V and -15VDC
Consists of modulator and demodulator units
Equipped with a voltage protection circuit
Frequency-key modulation:
Operating voltage: +15 V, +5 V and -15 VDC
Consists of modulator and demodulator units
Equipped with a voltage protection circuit
Phase modulation:
Operating voltage: +15 V, +5 V and -15 VDC
Consists of modulator and demodulator units
Equipped with a voltage protection circuit.
Differential phase modulation:
Operating voltage: +15 V, +5 V and -15 VDC
It consists of modulator and demodulator units.
Equipped with a voltage protection circuit.
Quadrature phase modulation:
Operating voltage: +15 V, +5 V and -15 VDC
It consists of modulator and demodulator units.
Equipped with a voltage protection circuit.
Pulse modulation unit (pulse amplitude modulation, pulse width modulation (PWM) and pulse phase modulation):
Operating voltage: +15 V, +5 V and -15 VDC
Consists of modulator and demodulator units
Built-in signal generator unit:
Sinusoidal, frequency 20 Hz – 20 kHz
Toothed, signal frequency 1.5 Hz – 10 kHz
Clock, 4 Hz – 40 kHz signal frequency.
Equipped with a voltage protection circuit.
Pulse-code modulation unit:
Operating voltage: +15V, +5V and -15VDC
It consists of modulator and demodulator units.
Equipped with a voltage protection circuit.
Time-division multiplexer:
Operating voltage: +15 V, +5 V and -15 VDC
It consists of a multiplexer, a demultiplexer and a clock oscillator.
Equipped with a voltage protection circuit.
Frequency-division multiplexer:
Operating voltage: +15 V, +5 V and -15 VDC
It consists of a multiplexer, a demultiplexer and a clock oscillator.
2 channels of information signal generator (sinusoidal)
Frequency 20 Hz – 20 kHz, 8 V in amplitude
2 channels of carrier signal generator (sinusoidal)
Frequency 200 Hz – 200 kHz, 8 V in amplitude
Equipped with a voltage protection circuit.
Power Supply:
Operating voltage: 220 V / 50 Hz AC. current
Output voltage: +15 V, +5 V, +5 V AND -15 VDC
Equipped with a fuse and an AC connector cable (IEC type)
Cross connector 40 pcs.
Connecting wire 30 cm, yellow 20 pcs.
Connecting wire 50 cm, black 2 pcs.
Connecting wire 50 cm, red 2 pcs.
Connecting wire 75 cm, yellow 10 pcs.
Manual of experiments 1 pc.